Kodak EasyShare Dock Series 3 Manual do Utilizador descarregar pdf (Página 16)

A-61121 May 1999 15

If either (or both) print cartridges are not seated correctly, one (or

both) of the yellow lights on the flex cable will flash. If this happens,

repeat Steps 7 through 9 until the print cartridges are installed

correctly.

NOTE: The flashing lights on the flex cable correspond with the print

cartridge(s) that is not positioned correctly.

10. When the print cartridges are installed correctly, reinstall the

Super12 Document Printer in the desired print location.

NOTES

• If you are rotating the Super12 Document Printer, be careful not

to twist or strain the flex cable.

• Be sure the plastic strips are removed only from the print

locations you want to print in, from both the transport plate and

belt module. Plastic strips should be left in place for any

unused locations.

11. Close the front cover when the Super12 Document Printer is seated

properly.

12. Perform function code F45 to test the print heads.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 29 30

Sem comentários

Kodak EasyShare Dock Series 3 Manual do Utilizador Página 16